Printing The Current Display - Sharp Zaurus ZR-5700 Operation Manual

6. Select Printer Path from Wireless or Cable.
7.
When using A4-size paper instead of the
default Letter-size, press the A key. To return
to Letter-size, press the L key. A small A
appears at the top of the Print display when
A4-size is selected.
• When using Documents, the page size may be set
as A4, LETTER or LEGAL using Page Setup.
• The setting will be retained even after the unit is
turned off or the reset button is pressed.
8.
When you complete your settings, touch OK.
Touch Set to save the print settings for future use.
You can press 2nd SEND to print a single entry.
However, the print display does not appear so you
cannot change the settings. It will be printed with
the current settings.
194
To print a specified group of entries:
1. Select an application.
2. Touch SEND and select "Print".
3. Select group from the "Print:" pop-up menu.
Select Printer Emulation and Printer Path, if
required.
4. Touch OK.

Printing the current display

You can print a copy of almost any display. Excep-
tions are confirmation displays (Yes/No), mes-
sages, etc. Printing of graphic images depends on
your printer's capabilities.
To print the current display:
1. Go to the display you want to print.
2. Press 2nd P.
• Press ON at any time to cancel printing.
• Message displayed during transfers or momen-
tarily displayed cannot be printed.
• With this operation, the print settings cannot be
changed. If you need to change the settings,
touch SEND and select "Print".