Receiving A Call - Sharp Zaurus ZR-5700 Operation Manual

Receiving a call

In addition to making outgoing calls, your unit can also
receive calls from other modems when set to "auto
answer".
To receive a call:
1.
Touch TOOLS and touch Terminal twice.
2. Select a blank entry field, touch SETUP and
then select "Dial Setting".
3. Enter a name for the expected caller, or a
general name such as "Answer". Leave the
Number field blank. Make settings changes
as required for the incoming call (speed may
be the only setting you need to change).
4. When you complete your settings, touch OK.
5. From the Dialing Directory display, select the
entry you just made, and then touch LOG
ON.
6. In the terminal display, enter ATS0=1 and
press ENTER.
This sets your unit's modem to automatically
answer a call after one ring. For an explana-
tion of AT commands (such as ATS0=1),
consult your modem manual.
• Any call is automatically answered.
• Press ON to turn off auto answer or to discon-
nect when the call is completed.
NOTE
The Sleep function is disabled in Terminal mode. Auto
answer draws battery power continuously so you should
set it up just prior to the call.
253