Commonly Asked Questions & Answers - Sharp Zaurus ZR-5700 Operation Manual

Commonly asked Questions & Answers
Q: I currently also own a Sharp Wizard and
would like to move my information from
my Sharp Wizard to the ZR-5700/ZR-5800.
How can I do it?
A:
If you own an OZ-5000/OZ-6000/OZ-9000 series
you can use wireless infrared transfer to move the
information over:
• Line up the two units so the infrared ports are
facing each other.
• On the ZR-5700/ZR-5800, select an application
(e.g. Activities) and display the index of that
application. (Note: Select "Holiday Yearly by
Day Index" when transferring "Ann2" from the
Organizer.)
• Select "Unit to Unit" from the SEND menu.
Touch "Receive" and then "OK".
• On the Wizard, select the application (e.g.
Schedule) and select "VIA INFRARED PORT" in
SET UNIT TO UNIT PATH from the Global
setting, then select "SEND ALL IN THIS MODE
(FILE)" in UNIT TO UNIT TRANSFER.
• Repeat for each application you want to transfer.
(See p. 218 for details.)
Be sure that the sending unit does not have a
blank (no characters) Telephone/Contact or User
File/Data File field name or else the Zaurus will not
be able to receive information (an error message
will appear).
If you own an OZ-8000/OZ-7000 series or YO-600/
ZQ-5000 series Electronic Organizer you can get
information using PC/Macintosh link software kits
(OZ-791/792/793/890/892/893/895).
PC/Macintosh Link instructions:
• Transfer the data from the OZ-8000/7000, YO-
600/ZQ-5000 series to the PC or Macintosh
using the above software.
• Connect your cable to the PC and the ZR-5700/
ZR-5800.
• Put your ZR-5700/ZR-5800 into a special import
mode by touching TOOLS, and selecting
PC-Link and Cable (Import).
• Select the PC/Macintosh Link command to "Send
data" to your Wizard.
The ZR-5700/ZR-5800 will "pretend" to be a
Wizard for purposes of receiving the information.
• When finished, disconnect the ZR-5700/ZR-5800
and press ON to cancel PC-Link mode.
(See p. 223 for details.)
35