Moving Around A Worksheet; Going To A Specific Cell - Sharp Zaurus ZR-5700 Operation Manual

Moving around a worksheet

Your unit displays a portion of the cells in a worksheet at
one time. There are several methods to display other
parts of the worksheet. You can move around the
worksheet in the following ways:
• Touch the scroll arrows to move the worksheet one
row or column at a time in the direction the arrow
points.
• Touch in the scroll bar or drag the scroll button to
move a proportional distance in the worksheet. The
display changes after you lift the pen.
• Select a cell or range and drag the pen to the edge of
the display where you want to view more columns (or
rows).
• Use the "Go To" Command.
• Use the "Find" Command.

Going to a specific cell

1. Touch UTILS, then select "Go to...."
Type the cell reference or choose TOP or
BOTTOM to go to the first or last cell in the
worksheet.
PenCell assumes that the bottom cell is the
last cell actually used in the worksheet, not
the maximum row or column in PenCell.
2.
Touch Go to....
The display moves to that portion of the
worksheet and the specified cell is high-
lighted.
When you touch Go to..., PenCell remembers the anchor
cell of the current selection. Next time you select Go to...
that cell will appear in the Go to dialog. This makes it easy
to switch between two areas of the worksheet.
NOTE
PenCell remembers the Current selection and the next
time you use "Go to" it appears as the destination in the
"Go to " dialog. This is an easy way to alternate between
two areas of a worksheet.
41