Sharp Zaurus ZR-5700 Operation Manual page 214

• Call Sharp's 24 hour automated Fax-on-demand
service at 612-397-8601
• Go to the ZAURUS forum on CompuServe and
download the appropriate files from the Zaurus
library.
• Call 800-BE-SHARP and request a free bro-
chure.
The MORE tool bar:
[PC FILES]
[RUN]
[DELETE]
Installing Add-on software programs
In general, Add-on software programs are distrib-
uted on a PC and floppy disks. You then need to
install the software using a PC Link cable or
infrared adaptor. PC Installer software is usually
included on the disk. You can select the main
memory or card memory as the installation
destination. It is also possible that you might
download Add-on software (e.g. from
CompuServe) or have software beamed to you
214
Changes to the PC Files Index
(see PC Files)
Executes the currently selected
program (you can also simply
double touch the program).
Deletes all programs or the last
installed program.
from another ZR-5700/ZR-5800. This software
could be installed via the PC Files area (see PC
Files).
See the directions included in the Add-on software
program instruction manual for more details about
installation.
Software on SRAM cards.
Up to 20 Add-on software programs can be
installed into the ZR-5700/ZR-5800. You can also
install up to 20 Add-on software programs onto an
SRAM or FLASH memory card. Generally Add-on
software programs installed on an SRAM card will
give you a choice as to where you want to store
the data created by the Add-on software program.
You can set the data storage location to be the
card or the main memory.
Software on FLASH cards.
Add-on software programs installed on FLASH
cards, automatically store their data in the main
memory. Program data cannot be stored on the
FLASH card. Although the ZR-5700/ZR-5800
supports up to 16MB FLASH cards, only 2MB can
be used for Add-on software programs.