Media; Reminder When Using The Usb Player - Strong SRT 32HC2003 User Manual

NOTE:
Environment Home /Shop
HDMI CEC
5.7.1 HDMI CEC
CEC Control
Audio Receiver
Device Auto Power Off Press t u to turn on this feature. When finished turn off your TV. The
TV Auto Power On
Device List
Device Menu

6.0 MEDIA

6.1 Reminder when using the USB player

1. Some USB storage devices may not be compatible to operate smoothly with this TV.
2. Back up all of the data in the USB storage device in case data is lost due to an
unexpected accident. STRONG does not assume any liability for the losses by misuse or
malfunction. Data backup is consumer's responsibility.
3. For large file sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in
USB mode otherwise the USB storage device or the files stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS
(playback only) file system provided with the Windows operating system. In case of a
storage device formatted as a different utility programme which is not supported by
Windows, it may not be recognized.
7. For Software Updates and Database functions it is recommended to use USB-Sticks
(keys) in FAT16 or.32.
8. When using a USB Hard Disk Drive which is not powered independently, ensure its
power does not exceed 500 mA. Otherwise the TV system will change into standby
mode, and you must pull out the USB Hard Disk and restart the TV system.
9. An "Unsupported File" message will be displayed if the file format is unsupported or
the file is corrupted.
14
After successfully update a message appears on screen. Power off by
removing the main power connector. Remove USB device and power
ON.
NEVER disconnect the USB device from the TV, the TV from the main
or switch OFF power during the update procedure. It can damage
your device and warranty will void!
Switch between Home modes and Shop modes with default
more brightness and Auto standby to off.
See next chapter 5.7.1.
Select this item and Press ENTER. Press t u to turn the HDMI CEC On
or Off.
Press t u to turn the Audio Receiver On or Off.
connected device will turn off automatically.
Press t u to select this option. When finished, turn on the connected
device. The TV will switch on automatically.
Press OK to open the main menu of device.
Access the device menu.
www.strong.tv