Troubleshooting - Strong SRT 32HC2003 User Manual

Move View
NOTE:
6.2.4 Browse text documents
Press t u to select Text in the main menu. Then press t u to select the drive disk you choose
to watch and ENTER to enter. Select the file you want to display by using pq t u and confirm
with OK. Quit step by pressing ENTER. Press t u to select return and go back to previous
menu.
6.2.5 Software update via USB
From time to time you can check if there is an improved software version available. This can be
viewed and downloaded from our website www.strong.tv. Search the model number on our
website's service support section. If there is an improved software version you can download
the file and copy it to the root of a USB device. Then press pq button to select Software
Update (USB) from the SETUP menu on your TV. Afterwards plug your USB device into the USB
slot and pressENTER to update the respective software. Confirm with Yes using t u. When the
update is completed, remove the USB stick, disconnect your device from the main power supply
and plug in again.

7.0 TROUBLESHOOTING

There maybe various reasons for abnormal operation of your TV set. Check your TV set
according to the general procedures shown below. Additionally, we strongly recommend
reading the detailed troubleshooting of your TV set in the full user manual available on our
website www.strong.tv. If your TV set does not work properly after checking the general and
detailed troubleshooting, please contact your dealer, the local Service Hotline, or send an email
to our support via www.strong.tv. DO NOT try to open or disassemble your TV set. It may cause
a dangerous situation and the warranty will be void.
Problem
The LED/Standby indicator
does not light up
www.strong.tv
When the image is magnified, use this function for convenient check.
Highlight this icon, press ENTER, then press t upq to move the
image.
The move function
1. Check whether the power connector is completely
plugged at the TV and into power socket.
2. Make sure that the switch on multipoint connectors is
switched ON as well.
3. The electrical outlet may be damaged.
4. STBY LED is defective.
is only available when the image is enlarged.
Possible cause and solution
17