Table of Contents
Advertisement
Audio System
You can output sound to speakers or headphones using an ordinary audio cable.
Connecting audio equipment
1.
Turn off the computer.
2.
Use the following audio cable for the connection:
To output the computer's audio signal to audio equipment:
LINE IN (R)
LINE IN (L)
Turn on the computer.
You can adjust the volume in Windows 98 by clicking the speaker
l
icon in the taskbar or with the volume control dial on the right side
of your computer.
When using the audio output jack, you cannot use the built-in
l
speakers.
Connecting Microphone
You can input sound using an external microphone connected to the microphone
jack. When using an external microphone, you cannot use the built-in microphone.
USB Device
Your computer has a new interface called Universal Serial Bus (MB). With a
USB connection, you can connect/disconnect peripherals without turning off the
computer. Remove the cover of the USB port before using. To use a USB device, set
the item USB Port: to Enabled in the Advanced menu of the Setup Utility. See also
the manuals of peripheral devices supporting USB.
Disabling the USB port may cause some PC card.s to mrr(firrrction.
Advertisement
Table of Contents
