Calling Up Running Hours - Quincy QGS 10 Instruction Book

Instruction book
Overview of the screens
Menu item
<dAtA>
(Data)
<ProG>
(Programming)
(Test)
<InFo>
(Info)

3.10 Calling up running hours

Starting from the Main screen:
• Press Enter button (7) for 3 seconds to enter the Main menu.
• Select <dAtA> and press Enter button (7) to enter the Data menu.
• Scroll Up or Down buttons (4-8) until <d.1> and the motor stopped symbol is shown.
2920 7113 41
Submenu Digital input screen Designation
<d.1>
<d.2>
<d.3>
<d.4>
<d.5>
<d.6>
<rEG.P> <Pr.SL>
(Regulation
Pressure)
<LPr.1>
<uPr.1>
<LPr.2>
<uPr.2>
<tiMr> <SrV.d>
(Timer)
<diSP> <tEMP>
(Display)
<PrES>
<bC.LG>
<Ctrl> <Lo.rE>
(Control)
<Ar.Af>
<Ar.d>
<nHCA>
<PASS>
<tESt> <tSt.1>
<P.rEL>
<F.rRl>
<F.dAY>
<F.Mnt>
<F.YAr>
<SEr.n>
Running hours.
Motor starts.
Module hours.
Loading hours.
Load solenoid valve.
Service timer.
Calling up or modifying pressure band
selection.
Calling up or modifying lower pressure
setting.
Calling up or modifying upper pressure
setting.
Calling up or modifying lower pressure
setting.
Calling up or modifying upper pressure
setting.
Maintenance warning.
Calling up or modifying unit of temperature.
Calling up or modifying unit of pressure.
Calling up or modifying time of backlight.
Local/remote start/stop.
Automatic restart after voltage failure.
Delay time of automatic restart after voltage
failure.
Maximum number of compressor starts per
hour.
Activating password protection.
Display test.
Parameter map release.
Firmware release.
Firmware release day.
Firmware release month.
Firmware release year.
Serial number.
37