Table of Contents
Advertisement
Unpacking and Installation
Warning
Use a properly grounded electrical
outlet of correct voltage and current
handling capacity.
Do not remove or modify grounded
power plug. Use only properly ground-
ed outlets to avoid shock hazard. Not
rated for use in hazardous atmos-
pheres.
8
General Usage
Do not use this product for anything other than its intend-
ed usage.
Unpacking
Remove your Isotemp hotplate, stirrer or stirring hotplate
from the carton. Inspect to ensure that the unit has not
been damaged during shipment. If the unit appears to
have sustained shipping damage contact Fisher Scientific
Customer Service at 866-984-3766.
The following items are included in the shipment:
Isotemp Hotplate, Stirrer or Stirring Hotplate
Stir Bar (Stirring models only)
Adapter (100V models only)
Temperature Probe (Heating models only)
Knob
Operator's Manual
Rod
Clamp (Heating models only)
If any of these items are missing from the carton, contact
Fisher Scientific.
Installation
Set the unit on a flat stable surface at least 12" away from
combustible materials, and plug the cordset into a proper-
ly grounded electrical outlet of correct voltage and current
handling capacity.
Run the stirrer at maximum speed for 10 minutes prior to
using the product.
Advertisement
Table of Contents
