Table of Contents
Advertisement
Unpacking
Fisher Scientific
Installation
Section 3
Choose a location for the incubator that will provide an area of
approximately 30 inches by 30 inches. Allow at least 2" of open space on
both sides and back of unit (six inches if combustible materials). The
bench or table selected must be capable of supporting at least 120 lbs. for
the Small incubators, 130 lbs. for the Medium incubators, or 135 lbs. for
the Large incubators. Appropriate electrical power must be available.
Locate the incubator within three feet of the power outlet so that no
extension cord is required.
Note If the equipment is not used in the manner specified by the
manufacturer, the protection provided by equipment may be impaired.
Fisher Scientific Isotemp® Incubators are shipped in a single carton. After
unpacking, locate each item shown in the list below. Report any missing
items, by name and part number, to your Fisher Scientific distributor. In
the event of shipping damage, retain the carton and packing material and
file a claim with the final carrier.
Item
Shelves
Small and Medium - one provided
Large - two provided
Shelf Supports
Small and Medium - two provided
Large - four provided
s
Isotemp Standard Incubators
3-1
Hide quick links:
Advertisement
Table of Contents
