Intended Purpose - TESTO 350 S Short Manual

2. Intended Purpose 25

2. Intended purpose
The testo 350S/M/XL measurement system is designed:
To check flue gas values:
· Emission check, for adherence to the values specified in the guidelines on flue gas emissions.
· In order to be able to meet measures to reduce flue gas.
· When searching for the cause of increased flue gas values.
Inspections:
· In order to be able to supply information on process measures.
The measurement should not be used for combustible gases (bio gases).
Flue gases should only be analysed after combustion.