Advertisement
2.
Use the product only for those applications for which it was
designed. Ask testo if you are in any doubt.
The product was designed for the following
tasks/applications:
·Fast and non-destructive evaluation of material moisture
courses in woods and building materials.
Does not replace reference methods such as CM
method or Darr-Wäge (dry-and-weigh) method.
The probe is not calibratable.
· For connection to testo 635-1 (Art.-no. 0560 6351) and
testo 635-2 (Art.-no. 0560 6352).
The product must not be used in the following areas:
· Areas at risk of explosion.
roducts Online at:
Intended purpose
Materials subject to electrical voltage.
Electric s s hock!
If in doubt, check whether the materials are
energized before the measurement (e.g. in the
event of water damage in walls)
GlobalTestSupply
www.
2. Intended purpose
.com
11
sales@GlobalTe
Advertisement
