TESTO 350 S Short Manual page 39

Messprogramm konfiguriert
Measuring program in progress
- Overview of programmed long-term measurement appears.
8 Confirm measurement program with
- Measurement program takes effect and is configured:
Start
9 Press function key
- Long-term measurement begins:
The symbol shows which program is currently running.
Long-term measurement starts with fresh air/rinse phase:
Fresh a a ir r r inse Z Z eroing 1 1 Z Z eroing 2 2 E E xposure t t o g g as
0 1 2
Fresh air time between measuring cycles:
Set fresh air time
Rinse F F resh a a ir Z Z eroing 1 1 Z Z eroing 2 2 E E xposure t t o g g as
Rinsing is ended once
rinse limits are reached.
Minimum and maximum measuring and fresh air cycles:
Measuring cycles:
Fresh air cycles:
Stop
10
ends the programmed measurement ahead of time.
- The measuring program remains activated (indicated by the symbol
- Generally, there is a rinsing phase of 2 minutes after the measuring program is
finished (pump slow).
6.2.3 Restarting measuring program
Start
Press function key.
- Measuring program starts again.
6.2.4 Deleting programming in instrument
Memory Program
1 Select –>
Measuring program is only deactivated and is not deleted.
Memory Program
2 Select
–>
- The last measuring program activated is shown.
3 Press the function button to reactivate.
.
.
Constant 6min
3 4 5
2 min to 240 min (4 h)
5 min to 1440 min (24 h)
Delete
–> –>
Info
–> .
6. Measurement examples 39
Measure
t in min
6
Measure
t
).
.