REPLACING PARTS
WARNING: Before carrying out any replacement procedure, activate all the safety devices pro-
vided and decide whether staff at work and those in the vicinity should be informed.
In particular, turn off the water supply taps, cut off the electricity supply to the appliance using the master
switch and prevent access to all devices which might cause unexpected health and safety hazards if turned on.
WARNING: If worn parts have to be replaced, use original spare parts only. If the power supply
cable is damaged it must be replaced by the Manufacturer or by the Assistance Service or by authorized
and qualifi ed personnel, in order to avoid risks.
WARNING: The manufacturer declines all responsibly for injury or damage to components due
to the use of non original parts, or extraordinary work on the appliance which may modify the safety re-
quirements without the manufacturer's authorisation.When ordering components, follow the instruc-
tions provided in the parts catalogue.
WARNING: Replacement operations must be carried out by authorised, qualifi ed staff , in accord-
ance with the relevant legal requirements.
To carry out this operation, proceed as follows.
1) Undo the screws to remove the rear panel (A).
2) Open the fuse-holder (B) and replace the damaged fuse (C).
3) Replace the fuse-holder and the side panel when the operation is complete.
To carry out this operation, proceed as follows.
1) Pull the clips (A) to open the inner door glass (B).
3395290_inst_GB_rev.2
REPLACING PARTS
INSTRUCTIONS AND WARNINGS FOR REPLACING PARTS
REPLACING THE FUSE
C
B
REPLACING THE LED
A
B
ENGLISH
A
A
A
15