REPLACING PARTS RECOMMENDATIONS
Before
performing
any
decide whether staff at work and those in the vicinity
and prevent access to all devices that might cause
unexpected health and safety hazards if turned on. If worn
or work performed on the appliance which may modify
the safety requirements without the manufacturer's
instructions provided in the parts catalog.
Replacement operations must be performed by an
relevant legal requirements.
REPLACING T E FUSE
WARNING Before perfor
that
involves
electrical
disconnection and/or exposure to electrical
co ponents al ays follo
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to co ply can cause
property da age in ury or death.
WARNING Disconnect the po er supply
efore replacing fuses.
1. Remove screws to remove side panel (A).
(B) and replace damaged fuse (C).
operation is complete.
Note: the appliance wiring diagram location can be
C
B
PARTS REPLACEMENT
component
replacement
ing any service
connection
the Electrical
A
C ANGING T E LAMP
WARNING Before perfor
that
involves
disconnection and/or exposure to electrical
co ponents al ays follo
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to co ply can cause
property da age in ury or death.
WARNING Disconnect the po er supply
efore replacing la ps.
1. Remove screws to remove lamp cover (A).
2. Remove and replace the lamp (B).
WARNING During the procedure
care not to touch the la p directly
protective gloves if necessary.
3. Replace lamp cover (A) and retighten screws
when the operation is complete.
or
Note: the appliance wiring diagram location can be
A
Combination Oven Installation and Operation Manual
Section 7
Parts Replacement
ing any service
electrical
connection
the Electrical
B
or
take
ear
39