The Setup Menu; Setting Options; Functional Principle; Setting Parameters - Fronius TransPocket 2500 Operating Instructions Manual

The Setup menu

Setting options

Welding process
Functional prin- The parameters can be set at 4 levels (TP 2500/3500) or 5 levels (TP 2500/3500
ciple TIG). The number of indicators lit corresponds to the level reached.
Level 0
Setting paramet- To alter a parameter setting, proceed as follows:
ers
1.
2.
3.
4.
IMPORTANT! The welding parameters are retained even if the mains plug is dis-
connected.
Settable parameters
Arc-force dynamic
Arc-force dynamic
Cel characteristic and arc-force dynamic
TIG Comfort Stop
Pulse frequency (TP 2500/3500 TIG
only)
Level 1
Using the "Process" button, select the desired parameter and hold the Pro-
cess button down.
- the set level is indicated for 1 second
- while the Process button is held down, the set value is raised one level
every second
Release the process button once the desired level is set.
The setting is now saved
The set process is displayed
Level 2 Level 3
Factory setting
Level 2
Level 2
Level 2
Level 0
Level 1
Level 4 Level 5
31