Setup Menu; Accessing The Setup Menu; Adjusting Parameters; Exiting The Setup Menu - Fronius TransPocket 180 RC HW Operating Instructions Manual

Setup Menu

Accessing the
1
Setup Menu
Adjusting Para-
1
meters
2
3
4
Exiting the
1
Setup Menu
26
Press both buttons at the same time
- The code of the first parameter from the Setup menu is dis-
played on the control panel
Turn the selection dial to select the desired parameter
Press the selection dial to display the set value of the parameter
Press the selection dial to change the value
- The set value is immediately active
- Exception: When resetting to the factory settings, the selection
dial needs to be pressed after changing the value in order to ac-
tivate the change.
Press the selection dial to go back in the list of parameters
Press Setup 1 or Setup 2 button to exit the Setup menu