Move The Cabinet With A Forklift Truck - ABB Terra HP Generation 3 CE Instruction Manual

Inspection and transport
Procedure
1. Install the swivel eye bolts or bolts
with lifting loops (A).
2. Connect the hoisting equipment (B).
3. Carefully tilt the charge post (C) to the
vertical position.
4. Remove the swivel eye bolts or bolts
with lifting loops (A).
5.5.3

Move the cabinet with a forklift truck

Preliminary requirements
Procedure
1. Move the forks (A) of the forklift truck
in the gaps at the side of the cabinet.
2. Move the cabinet to the correct
location.
34
Caution:
• Do not drop the charge post. There is a risk of damage.
• The cabinet is unpacked.
Refer to section 5.4.
Warning:
Risk of pinching or crushing, the cabinet is heavy
• Make sure that the forklift truck can lift the cabinet safely. Obey the
safety instructions that apply to the forklift truck. Take into account
the mass, the dimensions and the center of gravity of the EVSE. Refer
to sections 12.10
Caution: Do not drop the cabinet.
B
A
•
and 12.15.
C
Forklift truck. Refer to
section 12.3.
A
9AKK107992A2254-EN | 005