Section 4 Menu Settings; Preparations; Display/Hide The Status Screen; Starting And Exiting The Service Menu - Sony HDCE-TX30 Service Manual

This unit can display the unit status and entire system status on the monitor connected to the SDI output connectors to check or
change settings.

4-1. Preparations

4-1-1. Display/Hide the Status Screen

To display the status screen
Turn the DISP/MENU lever to the DISP side.
Tip
Turning the control knob changes the displayed page.
To exit the status screen display
In status screen display mode, set the DISP/MENU lever to the DISP position.

4-1-2. Starting and Exiting the SERVICE Menu

Starting
1. When the status screen or menu screen is displayed, hide the screen.
• When the status screen is displayed, turn the DISP/MENU lever to the DISP side once.
• When the menu screen is displayed, turn the DISP/MENU lever to the MENU side once.
2. While pressing the control knob, turn the CANCEL/ENTER lever quickly to the ENTER side twice.
3. Turn the DISP/MENU lever to the MENU side within two seconds.
4. Check that the following screen appears. If it does not appear, repeat steps 1 to 3.
<CCU MENU>
SYSTEM OPERATION
VIDEO/MONITOR
AUDIO/INTERCOM
MAINTENANCE
FILE
NETWORK
DIAGNOSIS
SERVICE
5. Set the cursor to [SERVICE] and press the control knob.
The SERVICE menu is displayed.
Menu Settings
DISP/MENU lever
CANCEL/ENTER lever
Control knob
Section 4
70