Sony HDCE-TX30 Service Manual page 49

3. Remove the two screws, and then remove the CN-4131 board.
4. Disconnect the harness from the connector (CN001) on the CN-4131 board.
Harness
CN-4131 board
5. Remove the three supplied nuts, and then remove the three BNC coaxial fixed washers and the three BNC coaxial connector
converters (BNC type).
BNC coaxial fixed washer
Supplied nuts
CN001
BNC coaxial fixed washers
P2.6 x 5
Coaxial connector
converters (BNC type)
45