Setup Menu; Changing Menu Item Settings - Sony HXCU-D70 Operating Instructions Manual

Setup Menu

The CCU system and peripheral settings can be checked and
modified using a picture monitor connected to the PIX output.

Changing Menu Item Settings

The menu screen is controlled using the knob and levers in the
MENU control block on the front panel.
Setting the CANCEL/ENTER lever to the ENTER position and
pressing the CONTROL knob perform the same function.
DISP/MENU lever and indicator
CANCEL/ENTER lever
MENU
DISP CANCEL
MENU ENTER
CONTROL
CONTROL knob
To display a menu page
Set the DISP/MENU lever to the MENU position.
When first powered on, the CCU MENU page is displayed.
To display the CCU MENU page
In menu display mode, turn the CONTROL knob to move the
pointer (,) to TOP in the upper right corner of the menu page,
then press the CONTROL knob.
The CCU MENU showing the menu configuration is displayed.
** CC U ME N U **
cSYS T EM OP ER AT I ON
CCU CO NF I GU RA TI O N
NETW OR K S ET TI NG S
Menu name
SYSTEM OPERATION
CCU CONFIGURATION
NETWORK SETTINGS
To select an item in the CCU MENU
Turn the CONTROL knob to move the pointer (,) up/down to
the desired menu item, then press the CONTROL knob.
The most recently viewed page in the selected menu is
displayed.
Description
Input/output signal format and
system-related settings
CCU configuration settings
Network-related settings
To change the displayed page
1
Turn the CONTROL knob to move the pointer (,) to
the page number, then press the CONTROL knob.
The pointer (,) changes to a flashing question mark (?).
Flashing
<OU TP UT S EL EC T> ? S0 1 TO P
OU TP UT :* CA ME RA
BA R
TE ST 1
TE ST 2
P IX :* EN C R G
R& B G &B
2
Turn the CONTROL knob to change the displayed
page to the desired page, then press the CONTROL
knob.
The question mark (?) changes back to the pointer (,).
Items on the page can now be selected and changed.
To change a menu item setting
If a question mark (?) is displayed beside the page number,
press the CONTROL knob to restore the pointer (,). Items
on the page can now be selected and changed.
1
Turn the CONTROL knob to move the pointer (,) to
the desired item, then press the CONTROL knob.
The pointer (,) changes to a flashing question mark (?).
2
Turn the CONTROL knob to change the setting.
To cancel a changed setting
Set the CANCEL/ENTER lever to the CANCEL position
before pressing the CONTROL knob. The item is restored
to its current setting.
To suspend menu changes
Set the DISP/MENU lever to the MENU position to exit the
menu screen.
The DISP/MENU lever can be set to the MENU position
again to restart the operation.
3
Press the CONTROL knob.
The question mark (?) changes back to the pointer (,),
and the item setting is registered.
4
Repeat steps 1 to 3 to change other settings on the
same page.
B
R& B RG B
Setup Menu
17