4.
Remove the DC fan (60 square) and the fan cushion (60 x 25) together from the F-fan mounting bracket.
5.
Remove the two fan cushions (60 x 25) from the DC fan (60 square).
Fan cushion (60 x 25)
DC fan (60 square)
F-fan mounting bracket
Note
•
When attaching the DC fan subassembly, pay attention to the position of label and harness.
•
When replacing the DC fan (60 square), attach two new fan cushions (60 x 25) at the positions shown above.
– Align portion A of the fan cushion (60 x 25) with portion B of the DC fan (60 square).
– Align the notch of the fan cushion (60 x 25) with the corner of the DC fan (60 square) shown above.
6.
Install the removed parts by reversing the steps of removal.
Attaching position of the fan cushion (60 x 25)
Harness
Label
Fan cushion (60 x 25)
Fan cushion (60 x 25)
A
Notch
A
Square
DC fan (60 square)
B
B
Square
A
B
Notch
B
A
Fan cushion (60 x 25)
57