Table of Contents
Advertisement
3.
Release the harness from the two cable clamps.
4.
Disconnect the harness from the connector (CN304) on the VIF-82 board.
5.
Disconnect the three coaxial cables from the connectors (J801, J1701, J1702) on the VIF-82 board.
VIF-82 board
CN304
Arrangement of the harness
Harness
Note
•
When connecting the coaxial cables, connect connectors correctly.
•
At the time of the installation, arrange the harness and the coaxial cables as shown in the figure.
Cable clamps
Cable clamps
J1701
J1702
J801
Harness
Arrangement of the coaxial cables
Coaxial cable (orange)
Coaxial cable (green)
Coaxial cable (yellow)
Coaxial cable (orange)
Coaxial cable (green)
Coaxial cable (yellow)
41
Advertisement
Table of Contents
