Table of Contents
Advertisement
4.
Remove the DC fan subassembly from the power fan mounting bracket.
Harness
Label
Note
When attaching the DC fan subassembly, pay attention to the position of label and harness.
5.
Remove the two fan cushions from the DC fan (60 x 15).
Fan cushions
Tip
When replacing the DC fan (60 x 15), attach two new fan cushions paying attention to the positions of the harness and the label.
6.
Install the removed parts by reversing the steps of removal.
DC fan subassembly
Power fan mounting bracket
DC fan (60 x 15)
Attaching position of the fan cushion
Harness
Fan cushion
Label
Long
Short
Fan cushion
53
Advertisement
Table of Contents
