Table of Contents
Advertisement
Preparation
Copy the OS update data to the USB drive using the following procedure.
Note
For how to obtain the data file for update (hdcetx50_os.pkg), contact your local Sony Sales Office/Service Center.
1.
Create the following directory in the USB drive.
\MSSONY\PRO\CAMERA\HDCETX50
2.
Copy the data file for update "hdcetx50_os.pkg" to the directory created.
Procedure
1.
Connect the USB drive that contains the program for update to the USB connector of this unit.
2.
Turn on the power of the unit.
3.
Open the [01<SOFTWARE PACKAGE>] page of the SERVICE menu. (Refer to "4-2-2. Description of SERVICE Menu".)
4.
Select "OS" and then press the control knob.
5.
A message "UPDATE OK?" appears. Select "YES".
The unit restarts automatically and the version update starts.
Upon completion of the version update, a message "UPDATE SUCCEEDED" appears.
6.
Turn off and on the power of the unit and confirm that the version has been updated on the VERSION1 page of the DIAGNOSIS
menu.
3-1-3. Upgrading Update Software
Equipment Required
•
USB drive (commercially available)
Tip
For recommended USB drive, contact your local Sony Sales Office/Service Center.
Preparation
Copy the upgrading update software update data files to be updated to the directory created.
Note
For how to obtain the data file for update (hdcetx50_updater.pkg), contact your local Sony Sales Office/Service Center.
1.
Create the following directory in the USB drive.
\MSSONY\PRO\CAMERA\HDCETX50
2.
Copy the data file for update "hdcetx50_updater.pkg" to the directory created.
Procedure
1.
Connect the USB drive that contains the program for update to the USB connector of this unit.
2.
Turn on the power of the unit.
3.
Open the [01<SOFTWARE PACKAGE>] page of the SERVICE menu. (Refer to "4-2-2. Description of SERVICE Menu".)
4.
Select "UPDATER" and then press the control knob.
5.
A message "UPDATE OK?" appears. Select "YES".
The unit restarts automatically and the version update starts.
Upon completion of the version update, a message "UPDATE SUCCEEDED" appears.
6.
Turn off and on the power of the unit and confirm that the version has been updated on the VERSION1 page of the DIAGNOSIS
menu.
68
Advertisement
Table of Contents
