Freestanding Customer Facing Display - Oracle MICROS 820 Setup Manual

Figure 5-4
Connect the cable to the Workstation 820 USB(CFD) port.
4.
If you are adding a Customer Facing Display to an existing Workstation 8 Series
5.
configuration with a Peripheral Expansion Module, connect the cable to the Peripheral
Expansion Module USB(CFD) port.

Freestanding Customer Facing Display

Figure 5-5
Connect the Freestanding Customer Facing Display cable to the Workstation 820
1.
USB(CFD) port.
If you are adding a Freestanding Customer Facing Display to an existing Workstation 8
2.
Series configuration with a Peripheral Expansion Module, connect the cable to the
Peripheral Expansion Module USB(CFD) port.
Mounting the Customer Facing Display on the Low Profile Stand
Freestanding Customer Facing Display
Chapter 5
Freestanding Customer Facing Display
5-3