Customer Facing Display For Low Profile Stand - Oracle MICROS 820 Setup Manual

Customer Facing Display for Low Profile Stand

Locate the Customer Facing Display mounting point cover with the Oracle logo.
1.
Figure 5-2
Use the Oracle 2.5mm hex key or equivalent to loosen the stand captive screws
2.
holding the cover in place, and then remove the cover.
Figure 5-3
Feed the Customer Facing Display cable through the opening in the mounting
3.
point, and then insert the Customer Facing Display into the captive screws. Use
the Oracle 2.5mm hex key or equivalent to tighten the stand captive screws.
Locating the Customer Facing Display mounting point cover
Removing the Customer Facing Display mounting point cover
Customer Facing Display for Low Profile Stand
Chapter 5
5-2