Data Transmission Between Incoming Nodes - Ebyte E180-DTU User Manual

Hide thumbs Also See for E180-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

E18-DTU(Z27-ETH) User Manual

Coordinator device

Router device

4.4.5 Data transmission between incoming nodes

The coordinator of the ZigBee 3.0 data transmission module needs to take on the network management function, and if it works in

transparent mode, it may miss important messages related to network changes. Therefore, we recommend that the coordinator work in HEX

command configuration mode when the number of nodes entering the network is large, and assign the connecting nodes to transfer data to

each other。

（1）Click "Enter Parameter Configuration" in the host computer interface, and the coordinator device and router device return to the

configuration mode. After the coordinator returns to the configuration mode, it receives a heartbeat packet reported by the network connection

device cycle。

Coordinator device

Router device

（2）The coordinator adds several more incoming nodes, sets a new device as "endpoint", and clicks "Write Parameters" → "Restart" to join

Table of Contents