Quickly Set Up A Zigbee Network - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
Note: After the device IP is modified, the configuration page entry will change the modified IP address, here 192.168.3.17, if the device
IP is forgotten, we can restore the network parameters through the Reload button。
（3）The progress bar is displayed to 100%, indicating that the parameter configuration was submitted successfully。

4.4.2 Quickly set up a ZigBee network

Combined with the host computer software to quickly and easily establish a ZigBee network, the specific steps are as follows：
（1）Connect radio station 1 to the computer, open the host computer software "ZigBee 3.0 host computer", select the device type, enter the
IP address, enter the port number, click Connect Server, and you can see that the right window shows that the connection is successful。
Copyright ©2023，成都亿佰特电子科技有限公司
E18-DTU(Z27-ETH) User Manual
51