Ebyte E180-DTU User Manual page 61

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

E18-DTU(Z27-ETH) User Manual

（6）On the host computer interface of the terminal device, set the "target short address" to "FE FF" (0xFFFE is an invalid short address, after

setting the target short address to an invalid short address, the device will automatically default the transparent transmission target to the bound

address), and click "Settings". Then enter "01 00" in "Module Plus Group", click "Module Plus Group", add the terminal device to the 0x0001

group, and then click "Enter Transfer Mode"。

（7）On the host computer interface of the router device, set the destination port to "00" (destination port setting 0x00 that is, multicast mode),

and then set the destination short address to "01 00" (the destination short address in multicast mode is the multicast address, here multicast to

the 0x0001 group), click Settings, and the router sends transparent transmission packets to the group 0x0001 multicast. Then tap "Enter

Transfer Mode".

Table of Contents