Ebyte E180-DTU User Manual page 56

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

E18-DTU(Z27-ETH) User Manual

（2）Click "Query" to query the configuration parameters of the device. The destination short address of the transparent transmission is

0xFFFF, and the destination port 0xFF (that is, 255), that is, the device defaults to broadcast in the transparent transmission mode.

（3）Then, the router device is set to transmit data to the coordinator device in the form of on-demand, and the coordinator device uses

broadcast mode to transmit data. In the host computer interface of the router device, set the destination short address to 00 00 (that is, 0x0000)

and the destination port to 01 (that is, 0x01 or 1), and then click "Settings". After the setting is complete, you can click "Query" again to

confirm whether the setting is successful。

（4）Enter the transparent transmission mode, and click "Enter transmission mode" on the host computer interface of the coordinator device

and the router device respectively, both of which can enter the transparent transmission mode. One serial port inputs any data, and the other

serial port can completely output the same data。

Table of Contents