Chapter 2 Specification Parameters; Main Specifications - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

Chapter 2 Specification Parameters

2.1 Main specifications

project
Operating voltage
interface
Working mode
Socket connection
Network protocols
How to obtain an IP
DNS domain name
resolution
Domain name resolution
server
Configuration mode
IP address
User name
password
Local port
Subnet mask
gateway
Serial port cache
Packaging mechanism
Serial port baud rate
Data bits
Stop bit
Check digit
Flow control
Product size
Product weight
Operating temperature
and humidity
Storage temperature and
humidity
Copyright ©2012-2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
8~28V DC, 12V or 24V power supply is recommended
Network port (RJ45), 10Mbps
TCP Server（default）、TCP Client、UDP Server、UDP Client、HTTP Client、
MQTT Client
The TCP server supports 6-way client connections
TCP/UDP、MQTT、HTTP、IPv4、DHCP、DNS
Static IP (default)、DHCP
Support
114.114.114.114（Customizable）
Web page, parameter configuration tool, AT command
192.168.3.7（Customizable）
admin（Customizable）
admin（Customizable）
8887（Customizable）
255.255.255.0（Customizable）
192.168.3.1（Customizable）
1024 Byte
512 Byte
1200 ～ 230400 bps（Default 115200） Note: It is recommended to use the default
parameters, but it is not recommended to modify them
5、6 、 7、 8（ default）
parameters, but it is not recommended to modify them
1 （ default ） 、 2
parameters, but it is not recommended to modify them
None（default）、 Odd、Even
parameters, but it is not recommended to modify them
Not supported
84×82×25mm
118g ± 2g
-40 ～ +85℃、5% ～ 95%RH（No condensation）
-40 ～ +105℃、5% ～ 95%RH（No condensation）
illustrate
Note: It is recommended to use the default
Note: It is recommended to use the default
Note: It is recommended to use the default
E18-DTU(Z27-ETH) User Manual
7