Factory Reset; At Command Configuration; Random Native Port - Ebyte E180-DTU User Manual

Hide thumbs Also See for E180-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

The main interface pops up on the webpage, and you can query and set relevant parameters；



Click Submit to save the configuration parameters；



The progress bar prompts the configuration progress, please do not refresh the web page again after the configuration is completed



(refresh the web page to enter the configuration mode again, you can enter the communication mode by restarting the device or

submitting it again)。

3.8.2 Factory reset

Press and hold the device's Reload button until all LEDs are fully lit to release the button。

Ethernet parameter AT command configuration: The relevant parameter query and modification of the device can be completed through

the AT command configuration. For specific AT commands, please refer to "NA11x&NB114&NS1&NT1-AT Command Set"。

TCP clients, UDP clients, HTTP clients, and MQTT clients can configure the native port to 0 (use random native ports), and the server

mode cannot use random ports, otherwise the client cannot establish a connection correctly。

E18-DTU(Z27-ETH) User Manual

Table of Contents