Table of Contents
Advertisement
14
model no. MPPH-06CRN1-BI0 | contact us: 1.866.646.4332
CARE AND MAINTENANCE
IMPORTANT :
1) Be sure to unplug the unit before cleaning or servicing.
2) Do not use gasoline, thinner or other chemicals to clean
Air filter
the unit.
3) Do not wash the unit directly under a tap or using a hose.
(take out)
It may cause electrical shock.
4) If the power cord is damaged, it should be repaired/replaced
by the manufacturer or its authorized agent.
Fig.22
1. Air filter
-
Clean the air filter at least once every two weeks to prevent
dust from affecting fan operation.
-
Removal
Take the air filter out along the arrow direction (Fig.22).
-
Cleaning
Air filter
Wash the air filter by immersing it gently in warm water
(install)
(about 40 C/104 F) with a neutral detergent. Rinse the filter
and dry it in a shady place.
-
Mounting
Install the air filter after cleaning (see Fig.23).
Fig.23
The grill and the air filter are connected but can be
NOTE:
separated.
2. Unit enclosure
-
Use a lint-free cloth soaked with neutral detergent to clean
the unit enclosure. Dry enclosure with a clean cloth.
3. If the unit will not be used for a long time
-
Remove the rubber plug at the back of the unit and attach
a hose to drain outlet . Place the open end of the hose
directly over the drain area in your basement floor
(See Fig.19 & 20).
-
Remove the plug from the bottom drain outlet, all the water
in the bottom tray will drain out (See Fig.21).
-
Keep the appliance running on FAN mode for half a day in
a warm room to dry the appliance inside and prevent mold.
-
Stop the appliance and unplug it, wrap the cord and
bundle it with the tape. Remove batteries from
the remote control.
-
Clean the air filter and reinstall it.
O
O
Advertisement
Table of Contents
