Comfee MPPH-10CRN1-BI0 Instruction Manual page 24

24
model no. MPPH-06CRN1-BI0 | contact us: 1.866.646.4332
.
Timer operation
SET TEMP.
ON
OFF
FAN SPEED
2
CAUTIONS
.
When you select the timer operation, the remote controller automatically
transmits the timer signal to the indoor unit at the specified time.
Therefore, keep the remote controller in a location from which it can
transmit the signal to the indoor unit properly.
The effective operation time set by remote controller is limited in 24 hours.
1. TIMER button
.
Press the TIMER button, the remote
displays 0.0 alongside either the TIMER
ON or TIMER OFF indicator, and will
flash.
2. TEMP/TIME button
Press to set the desired time.
Forward
Backward
.
Press or hold the forward or backward
button to change the Auto time by 0.5
hour increments, up to 10 hours, then
1
at 1 hour increments up to 24 hours.
.
The selected time will register in 3nds
3
after setting.
3. After setting the timer for TIMER ON and
TIMER OFF, check the TIMER indicator
on the display panel of the unit is
illuminated.
Canceling
4. Cancel button(CANCEL)
Press the CANCEL button to cancel
the timer setting.
Changing
Preform steps 1, 2 and 3 to change the
settings.