Table of Contents
Advertisement
Cooling /Fan only operation
Start
Ensure unit is plugged and power is available.
The OPERATION lamp on the display panel of
1. Mode select button (MODE)
CLOCK
SET TEMP.
FAN SPEED
2. TEMP/TIME button
4
3
1
3. Fan speed button (FAN SPEED)
2
4. ON/OFF button
DRYING OPERATION
CLOCK
SET TEMP.
FAN SPEED
3
1
2
the indoor unit starts flashing.
Press to select COOL, FAN ONLY
Set the desired temperature, the most comfortable
temperature is between 21 C/70 F to 2 8 C/83 F.
Press to select "AUTO" "LOW", "MED" and "HIGH"
When the remote controller is off, push this
button to start the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
The FAN ONLY mode does not control temperature.
Therefore, perform only steps 1,3, and 4 to select
this mode.
Start
Ensure unit is plugged and power is available.
The OPERATION indicator on the display panel
of the indoor unit starts flashing.
1. Mode select button (MODE)
Press to select DRY.
2. TEMP/TIME button
Push the "TEMP/TIME" button to set the desired
。
temperature from 21 C/70 F to 28 C/83 F.
3. ON/OFF button
When the remote controller is off, push this
button to start the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
Note: The fan speed cannot be adjusted when
the unit is in AUTO and DRY mode.
。
。
O
O
o
O
23
Advertisement
Table of Contents
