Table of Contents
Advertisement
R emove the
drain plug
Fig.19
Continuou s
drain hos e
Fig.20
Fig.21
Water drainage:
-
I n dehumidifying mode,remove the drain
plug from the back of the unit. You may also
connect a 3/4" (1.9cm) garden hose (sold
separately) onto the 5/8" (1.58cm) drain
connector on the unit. For models without a
drain connector, just attach the drain hose to
the hole. Place the open end of the hose directly
over the drain area in your basement floor.
Please refer to Fig.19 & 20.
-
When the water level in the bottom tray reaches
a predetermined level,
the digital display area shows P1 . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate (this is normal).
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away (Fig.21). Reinstall the bottom
drain plug and restart the machine until the P1
symbol disappears. If the error repeats, call for
service.
Bottom dra in plug
the unit beeps 8 times and
"
"
"
"
13
Advertisement
Table of Contents
