Table of Contents
Advertisement
7.5 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press
the SNOOZE key. The alarm icon will continue to flash and the
alarm will silence for five minute.
Press any key (MAX/MIN/-, SET, ALARM, CHANNEL/+) to
permanently exit the SNOOZE mode.
7.6 Backlight Mode
7.6.1 Adjustable Brightness of Backlight
There are 3 levels of brightness of display backlight. When the
backlight is on with adapter, press SNOOZE key to switch
between the 3 levels.
In the brightest backlight of 3 levels, press the SNOOZE key to
turn off the backlight.
When backlight is off with adapter, press the SNOOZE key and
the backlight will turn on for 3 levels adjustable backlight.
Note: If the display console plugged into AC adapter power,
the time area will display BL ON and the backlight will remain
on. It is not recommended leaving the display backlight on for
a long period of time when operating on batteries only, or the
batteries will run out quickly.
Note: The backlight operation is different when operating
on batteries to save power.
- 26 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SC089 and is the answer not in the manual?
Questions and answers
How do I reset the indoor temperature setting on my sainlogic sc089 weather station.
To reset the indoor temperature on the Sainlogic SC089 weather station, press and hold the MAX/MIN key for three seconds to clear all minimum and maximum values, including indoor temperature. After reset, the display will show the current values.
This answer is automatically generated