Snooze Mode; Backlight Mode - Sainlogic WS0355 User Manual

pressure (ABS or REL), outdoor temperature and humidity
(feels like or dew point), and indoor temperature and humidity
.
Press the MAX/MIN/- key for three seconds to clear all Min
values.(pressure, temperature and humidity minimum values).
Press the SNOOZE key to exit the min/max checking and reset
mode, return to normal display mode.
Note: The Minimum values will display the current values
after reset.

7.5 Snooze Mode

If the alarm sounds, and you wish to silence the alarm, press
the SNOOZE key. The alarm icon will continue to flash and the
alarm will silence for five minute.
Press any key (MAX/MIN/-, SET, ALARM, CHANNEL/+) to
permanently exit the SNOOZE mode.

7.6 Backlight Mode

7.6.1 Adjustable Brightness of Backlight
There are 3 levels of brightness of display backlight. When the
backlight is on with adapter, press SNOOZE key to switch
between the 3 levels.
- 10 -