Table of Contents
Advertisement
Indoor and Outdoor
Temperature do not agree
Indoor and Outdoor Humidity
do not agree
Move the display console
around electrical noise
generating devices, such as
computers, TVs and other
wireless transmitters or
receivers.
Move the remote sensor to a
higher location. Move the
remote sensor to a closer
location.
Allow up to one hour for the
sensors to stabilize due to
signal filtering. The indoor and
outdoor temperature sensors
should agree within 2°C/4°F)
(the sensor accuracy is ±
1°C/2°F)).
Use the calibration feature to
match the indoor and outdoor
temperature to a known
source.
Allow up to one hour for the
sensors to stabilize due to
signal filtering. The indoor and
outdoor humidity sensors
should agree within 10 % (the
- 45 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SC089 and is the answer not in the manual?
Questions and answers
How do I reset the indoor temperature setting on my sainlogic sc089 weather station.
To reset the indoor temperature on the Sainlogic SC089 weather station, press and hold the MAX/MIN key for three seconds to clear all minimum and maximum values, including indoor temperature. After reset, the display will show the current values.
This answer is automatically generated