Table of Contents
Advertisement
3.2 Recommend Tools
Precision screwdriver (for small Phillips screws)
Compass or GPS (for wind direction calibration)
Adjustable Wrench.
3.3 Sensor Assembly Set Up
Note: The outdoor sensor array must be powered and
updating before powering up the console, or the console will
stop scanning and connecting with the sensors.
The following illustration shows the full segment of integrated
outdoor sensor , Wind, Rain, UV and Sunlight sensor, as
shown in Figure 2.
Figure 2
3.3.1 Install Integrated Outdoor Sensor Battery.
Locate the battery door on the bottom of transmitter as show in
Figure 3.
- 6 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SC089 and is the answer not in the manual?
Questions and answers
How do I reset the indoor temperature setting on my sainlogic sc089 weather station.
To reset the indoor temperature on the Sainlogic SC089 weather station, press and hold the MAX/MIN key for three seconds to clear all minimum and maximum values, including indoor temperature. After reset, the display will show the current values.
This answer is automatically generated