ICP DAS USA ISaGRAF PAC Series Getting Started page 59

As diagram below, you have completed it.
Connecting Output:
To connect the output attributed variables to "XW107", please click "DO8" and double
click on the right side of channel "1". Select the variable name that corresponds to the
channel, and click "Connect" button. Finally, click "Close" to close the window.
Remember to click the "Save" button after you completed the I/O connection.
Important Notice:
All of the Input and Output variables MUST be connected through the I/O connection as
described above for any program to be successfully compiled. Only the Input and Output
variables will appear in the "I/O Connections" window.
Getting Started: PAC-5007/5107/5207/5307 Ver. 1.1, 12/2011
1.
5.
2.
ICP DAS
4.
3.
3.
4-14