7: Connecting The I/O - ICP DAS USA ISaGRAF PAC Series Getting Started

Please follow the same way to specify all variables to the "Contact" and "Coil". Later,
remember to click the "Save" button to store the settings (As diagram below).

4.1.7: Connecting the I/O

The ISaGRAF Workbench is an open programming system. This allows user to create
their ISaGRAF program to control a large number of variant PLC controller systems. The
PLC hardware manufacturer should be responsible to embed the "ISaGRAF kernel" in
their respective controller so that the ISaGRAF program operates properly.
The ICP DAS ISaGRAF PAC Series, programmable automatic controller, provides a
powerful and flexible industrial controller system.
Connecting I/O Equipment:
You have created the ISaGRAF example program. Now, the I/O variable we created
before should be map to the μPAC-5x07's real I/O. In this example, we use μPAC-5307
PAC with an "XW107" I/O expansion board to add digital input and output channel
(Please refer to
Click the "I/O Connection" tool button and the "I/O Connection" window will appear.
As diagram below,
1. Double-click "0" slot, the "Select Board/ Equipment" window will appear.
Getting Started: PAC-5007/5107/5207/5307 Ver. 1.1, 12/2011
).
Appendix D
4-12
ICP DAS