Management Interfaces - HP IBRIX 9300 Administrator's Manual

File systems. Set up the following features as needed:
NFS, SMB (Server Message Block), FTP, or HTTP. Configure the methods you will use to access
file system data.
Quotas. Configure user, group, and directory tree quotas as needed.
Remote replication. Use this feature to replicate changes in a source file system on one cluster
to a target file system on either the same cluster or a second cluster.
Data retention and validation. Use this feature to manage WORM and retained files.
Antivirus support. This feature is used with supported Antivirus software, allowing you to scan
files on an IBRIX file system.
IBRIX software snapshots. This feature allows you to capture a point-in-time copy of a file
system or directory for online backup purposes and to simplify recovery of files from accidental
deletion. Users can access the file system or directory as it appeared at the instant of the
snapshot.
Block Snapshots. This feature uses the array capabilities to capture a point-in-time copy of a
file system for online backup purposes and to simplify recovery of files from accidental deletion.
The snapshot replicates all file system entities at the time of capture and is managed exactly
like any other file system.
File allocation. Use this feature to specify the manner in which segments are selected for storing
new files and directories.
Data tiering. Use this feature to move files to specific tiers based on file attributes.
For more information about these file system features, see the
User Guide.
Localization support
Red Hat Enterprise Linux 5 uses the UTF-8 (8-bit Unicode Transformation Format) encoding for
supported locales. This allows you to create, edit and view documents written in different locales
using UTF-8. IBRIX software supports modifying the /etc/sysconfig/i18n configuration file
for your locale. The following example sets the LANG and SUPPORTED variables for multiple
character sets:
LANG="ko_KR.utf8"
SUPPORTED="en_US.utf8:en_US:en:ko_KR.utf8:ko_KR:ko:zh_CN.utf8:zh_CN:zh"
SYSFONT="lat0-sun16"
SYSFONTACM="iso15"

Management interfaces

Cluster operations are managed through the IBRIX Fusion Manager, which provides both a GUI
and a CLI. Most operations can be performed from either the GUI or the CLI.
The following operations can be performed only from the CLI:
SNMP configuration (ibrix_snmpagent, ibrix_snmpgroup, ibrix_snmptrap,
ibrix_snmpuser, ibrix_snmpview)
Health checks (ibrix_haconfig, ibrix_health, ibrix_healthconfig)
Raw storage management (ibrix_pv, ibrix_vg, ibrix_lv)
Fusion Manager operations (ibrix_fm) and Fusion Manager tuning (ibrix_fm_tune)
File system checks (ibrix_fsck)
Kernel profiling (ibrix_profile)
Cluster configuration (ibrix_clusterconfig)
HP IBRIX 9000 Storage File System
Management interfaces 13