Deleting Reports; Maintaining The Statistics Tool; Space Requirements - HP IBRIX 9300 Administrator's Manual

To generate a report, enter the necessary specifications and click Submit. The completed report
appears in the list of reports on the statistics home page.
When generating reports, be aware of the following:
A report can be generated only from statistics that have been gathered. For example, if you
start the tool at 9:40 a.m. and ask for a report from 9:00 a.m. to 9:30 a.m., the report cannot
be generated because data was not gathered for that period.
Reports are generated on an hourly basis. It may take up to an hour before a report is
generated and made available for viewing.
NOTE: If the system is currently generating reports and you request a new report at the same
time, the GUI issues an error. Wait a few moments and then request the report again.

Deleting reports

To delete a report, log into each node and remove the report from the /local/statstool/
histstats/reports/ directory.

Maintaining the Statistics tool

Space requirements

The Statistics tool requires about 4 MB per hour for a two-node cluster. To manage space, take
the following steps:
Maintain sufficient space (4 GB to 8 GB) for data collection in the /usr/local/statstool/
histstats directory.
Monitor the space in the /local/statstool/histstats/reports/ directory. For the
default values, see
84 Using the Statistics tool
"Changing the Statistics tool configuration" (page 85).