Using The Gui - HP IBRIX 9300 Administrator's Manual

Configuration database consistency (ibrix_dbck)
Shell task management (ibrix_shell)
The following operations can be performed only from the GUI:
Scheduling recurring data validation scans
Scheduling recurring software snapshots
Scheduling recurring block snapshots
Scheduling recurring block snapshots
Scheduling recurring block snapshots

Using the GUI

The GUI is a browser-based interface to the Fusion Manager. See the release notes for the supported
browsers and other software required to view charts on the dashboard. You can open multiple
GUI windows as necessary.
If you are using HTTP to access the GUI, open a web browser and navigate to the following
location, specifying port 80:
http://<management_console_IP>:80/fusion
If you are using HTTPS to access the GUI, navigate to the following location, specifying port 443:
https://<management_console_IP>:443/fusion
In these URLs, <management_console_IP> is the IP address of the Fusion Manager user VIF.
The GUI prompts for your user name and password. The default administrative user is ibrix.
Enter the password that was assigned to this user when the system was installed. (You can change
the password using the Linux passwd command.) To allow other users to access the GUI, see
"Adding user accounts for GUI access" (page
Upon login, the GUI dashboard opens, allowing you to monitor the entire cluster. (See the online
help for information about all GUI displays and operations.) There are three parts to the dashboard:
System Status, Cluster Overview, and the Navigator.
14 Getting started
17).