Checking The High Availability Configuration - HP IBRIX 9300 Administrator's Manual

ibrix_hba -d -h HOSTNAME -w WWNN
Displaying HBA information
Use the following command to view information about the HBAs in the cluster. To view information
for all hosts, omit the -h HOSTLIST argument.
ibrix_hba -l [-h HOSTLIST]
The output includes the following fields:
Field
Host
Node WWN
Port WWN
Port State
Backup Port WWN
Monitoring

Checking the High Availability configuration

Use the ibrix_haconfig command to determine whether High Availability features have been
configured for specific file serving nodes. The command checks for the following features and
provides either a summary or a detailed report of the results:
Programmable power source
Standby server or standby segments
Cluster and user network interface monitors
Standby network interface for each user network interface
HBA port monitoring
Status of automated failover (on or off)
For each High Availability feature, the summary report returns status for each tested file serving
node and optionally for their standbys:
Passed. The feature has been configured.
Warning. The feature has not been configured, but the significance of the finding is not clear.
For example, the absence of discovered HBAs can indicate either that the HBA monitoring
feature was not configured or that HBAs are not physically present on the tested servers.
Failed. The feature has not been configured.
The detailed report includes an overall result status for all tested file serving nodes and describes
details about the checks performed on each High Availability feature. By default, the report includes
details only about checks that received a Failed or a Warning result. You can expand the report
to include details about checks that received a Passed result.
Viewing a summary report
Use the ibrix_haconfig -l command to see a summary of all file serving nodes. To check
specific file serving nodes, include the -h HOSTLIST argument. To check standbys, include the
-b argument. To view results only for file serving nodes that failed a check, include the -f argument.
ibrix_haconfig -l [-h HOSTLIST] [-f] [-b]
For example, to view a summary report for file serving nodes xs01.hp.com and xs02.hp.com:
48 Configuring failover
Description
Server on which the HBA is installed.
This HBA's WWNN.
This HBA's WWPN.
Operational state of the port.
WWPN of the standby port for this port (standby-paired HBAs only).
Whether HBA monitoring is enabled for this port.