Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Data Storage Devices
Marketing Name / Model
[List multiple models if applicable.]
Ultrium 4, LTO1840 full height external / EH861X, PD016X, EH854X & PD091X
Ultrium 3, LTO960 full height external / Q1539X & PD071
Ultrium 2, LTO460 full height external / Q1520B
Where X = any alphanumeric combination
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
EL-MF877-00
Template Revision A
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
All on PSU
SCSI ribbon cable. SCSI enclosure only
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
7
0
0
0
0
0
5
0
0
1
0
0
0
0
Page 1
Advertisement
Related Manuals for HP Invent EH861 Series
Summary of Contents for HP Invent EH861 Series
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Torx screwdriver T5, T8 &...
- Page 3 I/O PCA > 10 square cm. SCSI ribbon cable contains Remove 4 x securing nuts to remove the I/O SCSI PCA brominated flame retardant PCA > 10 square cm’s 2 x T-10 screws from rear of 4 x size ‘1’ crosshead screws from chassis.
- Page 4 6) Main PCA and FFC connectors. T-10 T-10 PCA > 10 square cm’s Above: PCA shield 7) CMWP PCA. 5 x T-5 screws CMWP PCA > 10 square cm 8) Reel motor PCAs. Both reel motor PCAs > 10 square Remove the tape reel EL-MF877-00...