Table of Contents
Advertisement
Box Side Panel Installation
Place (1) Box Side Panel (Item #1) on either side of the Front Panel. Make sure the Side Panel is on the inside of the
Front Panel and Bottom Panel. Align all mount holes of these parts.
When securing the right Side Panel along the upright side with the Front Panel, use (3) 5/16"-18 x 1/2" HHCS (Item
#5) and (3) 5/16"-18 Flange Nuts (Item #4). Along the bottom, use (3) 5/16"-18 x 3/4" Carriage Bolts (Item #3) and (3)
5/16"-18 Flange Nuts (Item #4). Refer to Figure A. Be sure to secure the Side Panel relatively loose.
When securing the left Side Panel, utilize the same hardware to secure the bottom side. Before securing the upright
side, attach (1) Handle Rail Assembly (Item #2) and then secure the left side by using (2) 5/16"-18 x 3/4" Carriage
Bolts (Item #3), (1) 5/16"-18 x 1/2" HHCS (Item #5) and (3) 5/16"-18 Flange Nuts (Item #4). Refer to Figure A. Be sure
all hardware are relatively loose for the next step.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Right
Left
Front
Bottom
Right
9
Advertisement
Table of Contents
